Air ducts VANVENT PVA, FS, etc.

Semi-rigid aluminum air ducts of the VPA have a spiral-wound design and are made of aluminum foil of the corresponding brands on imported equipment.
The thickness of the foil used is 0.08 mm, which allows the use of semi-rigid aluminum ducts at temperatures up to +250 ° C and a maximum pressure of up to 2,500 Pa.
Convenient and easy to operate. They are easily and quickly connected to channels of both round and oval cross-sections.

• VPA. Brief description.

Non-insulated flexible FS air ducts are made of metallized polymer film with coils of high-strength steel wire between the layers.
The flexible duct simply connects to the channels of circular cross-section and can be fixed with clamps.
They are used in air conditioning and ventilation systems with low and medium pressure. They are also used for gas removal systems, sawdust dust, etc. In the compressed state 40 cm .
Working length 9.5 m. The maximum length is 10m.
Models: FS-102, FS-127, FS-152, FS-160, FS-203, FS-254, FS-315, FS-356, FS-406, FS-456, FS-508.

• FS (Non-Isolated). A brief description.

Flexible insulated (warm) air ducts are made of metallized polymer film with coils of high-strength steel wire between the layers.
With standard thermal insulation of 25 mm. The "URSA" material is used. Minimize temperature loss at a distance of up to 20 meters.
The flexible duct is used in air conditioning and ventilation systems with low and medium pressure, it is simply connected to circular channels and can be fixed with clamps.
In the compressed state , 120 cm . Working length 9.5 m. The maximum length is 10m.
Models: FS-102, FS-127, FS-152, FS-160, FS-203, FS-254, FS-315, FS-356, FS-406, FS-456.

• FS (Isolated). A brief description.

Flexible heat-insulated noise-absorbing Sono ISO FS air ducts are made of metallized polymer film with coils of high-strength steel wire between the layers. With a standard thermal insulation of 30 mm.
Operating temperature from -30° to +60° C
Maximum pressure 2400 Pa
The maximum flow rate is 24 m/s.
Models: FS-152, FS-160, FS-203, FS-254, FS-315, FS-356, FS-406, FS-456.

• Sono ISO FS. A brief description.

Plastic air ducts. For the manufacture of modern air ducts, high-quality polyvinyl chloride is used, about the same as is used in the production of plastic windows.
- Flat VENTILATION box 110*55mm, 120*60mm
- Connector of round channels Ø100
- Connector of flat channels 110*55mm.
- Plastic ventilation pipe Ø100

Galvanized pipe is resistant to corrosion and has a long service life. The pipe can perform not only its direct functional load, but also be used as a design element, since the zinc coating can be both glossy and matte.
Material: galvanized steel - 0.5 mm, Length: 1m.

• Galvanized pipe. A brief description.

Price list